WaterMe-Wireless Irrigation Controller + Qty 1 x 2″ Flow Sensor

Features

– Remote access via mobile app or computer (internet connection required)

– 10 independent schedules

– Permanent program memory

– Photo Capture to identify Zones

– Push notification sent to smart phone in case of leak or flow rate out of specification

– Programmable master valve delay time

– Programmable mist cycle

– Local weather synchronization automatically alters watering schedules

Input Capabilities

– 1 x Master Valve

– 10 x Solenoid Valves

– 3 x Flow Sensor (1 Included)

– 1 x Rain Sensor

– 1 x Moisture Sensor

-Apple and Android mobile platform capable

Electrical Specification

Transformer input 24VAC, 50 Hz

Transformer output 24VDC 1.5 Ams

Maximum valve current 24VAC at 1.0 AMP

Functional

– 24VAC/DC valves (Max current draw 1000mA/Valve)

– Controller provides full current on valve start up then reverts to low current on run, saving up to 70% power

– DC latching valve compatible 6-12v DC

– Weather resistant material

– Apple and Android operating platform capable

– Simple setup, operation and programming experience

– Australian Designed and Engineered

2″(DN40) Flow Sensor:

2″ BSP Male Thread Inlet + 2″ BSP Male Thread Outlet

– Flow Range: 5 – 300 LPM

– Repeatability <= 1%

– Accuracy <=2.5% of FULL SCALE

– Max. fluid temperature: 60 DEG C

– Max. Ambient Temp. Range: 0 DEG C – +60 DEG C

– Max. Fluid Pressure: 1.5 Mpa

– Operating Voltage: +5V – + 24V

– Output Frequency: Square Wave

FLOW SENSOR CALIBRATION VALUE (K) = 3 (For WaterMe Controller Flow Sensor Settings)

Material:

Body: 30% Glass Filled Nylon
Support Spindle: 316 Stainless Steel
Paddle Wheel: Acetal (POM)
Oring: Nitrile
Screws: 304 Stainless Steel