WaterMe Irrigation Controller + Qty 10 x 1″ Irrigation Manifold Assembly (10 x 1″ Manifold +1 x 1″ Inline Solenoid) – 100LPM

The WaterMe Combo Includes:

WaterMe – Wireless Irrigation Controller
Qty. 10x Solenoid Valve 1″ BSP (Barrel Union Assembly) Inlet – 1″ BSP out (Female) 100LPM
Qty. 1x Inline Master Solenoid Valve 1″ BSP (Female) – 1″ BSP (Female) out 24VAC 100LPM
Qty. 2x Elbow Swivels with O-ring to suit

Condition: New

WaterMe – Wireless Irrigation Controller

Features

Remote access via mobile app or computer (internet connection required)
10 independent schedules
Permanent program memory
Photo Capture to identify Zones
Push notification sent to smart phone in case of leak or flow rate out of specification
Programmable master valve delay time
Programmable mist cycle

Functional

24VAC/DC valves (Max current draw 1000mA/Valve)
Controller provides full current on valve start up then reverts to low current on run
DC latching valve compatible 6-12v DC
Weather resistant material
Apple and Android operating platform capable
Simple setup, operation and programming experience
Australian Designed and Engineered

Input Capabilities

1 x Master Valve
3 x Flow Sensor (1 Included)
10 x Solenoid Valves
1 x Rain Sensor
1 x Moisture Sensor

Electrical Specification

Transformer input 24VAC, 50 Hz
Transformer output 24VDC 1.5 Ams
Maximum valve current 24VAC at 1.0 AMP
24VAC/DC valves (Max current draw 1000mA/Valve)

Irrigation Solenoid Valve 24VAC – 100LPM

Technical Specification

Operating Pressure Range – 20Kpa to 1250Kpa
Power Consumption – 8VA
Frequency – 50Hz
Flow – 100LPM
Voltage – 24VAC
Lead Length – 200mm
Valve Type – Normally Closed
Temperature Range – 2°C – 60°C (Ambient), 2°C – 80°C (Media)

Material

Body – 30%Glass Filled Nylon
Coil Encapsulation – 30%Glass Filled Nylon
Diaphragm – Natural Nitrile Elastomer
Disk Diaphragm – Acetal
Filter – Acetal
Application Area – Liquid, Gas & Light Oil
Made in Australia
WaterMark Approved and Compliant with ATS 5200.030